VMLOGIN fingerprint browser.

There are two methods to configure MaxProxy proxy IP in the VMLogin fingerprint browser:

•  The first method is similar to the 911s5 Proxy, achieved through the Proxy IP + port forwarding mode. If you have used the 911s5 Proxy, it is easy to understand the configuration.
•  The second method is to directly obtain IP information in MaxProxy proxy software and copy it to the proxy settings of each VMLogin fingerprint browser.
• If you want to open 10 VMLogin fingerprint browser windows simultaneously, configure 10 IP addresses for ten ports in the MaxProxy proxy software. The configuration methods for dynamic IP and static IP in MaxProxy Proxy are the same, with the above two configuration modes (port forwarding and IP acquisition).

Ⅰ. Create a new VMLogin browser: 

1. Click “New Browser Configuration” on the homepage of the VMLogin software;

2. Or click “Create New Configuration File” in the browser configuration file of the VMLogin software.

ⅠⅠ.Generate proxy IPs in MaxProxy as needed:

【Get IPs from dynamic or static IPs in MaxProxy】

1. Choose the 【Dynamic IP】 or 【Static IP】 tab as needed;
2. Click the 【Get IP】 button;
3. Select the desired country/region and city;
4. Select the number of proxy IPs needed for ordering, using one as an example here;
5. Click the 【Order】 button to complete the purchase of the Proxy IP.

[Proxy IP + Port Forwarding mode]

1. Click the [Forward Port] icon in the proxy IP list;
2. Select a port and assign the Proxy IP to that port;
3. Click the [OK] button.

You can see which proxy IP is assigned to the port on the Proxy tab.

【Directly obtain IP information mode】

1. Click the “Copy” icon in the operation field of the proxy IP list;
2. Click the “Copy” button to copy a proxy IP (here, you can choose the arrangement of IP information and select the HTTP or SOCKS5 protocol as needed);
3. Click the “Close” button to close the IP detailed information interface.

ⅠⅠⅠ.Configuring MaxProxy Proxy IP in VMLogin Fingerprint Browser:

[Proxy IP + Port Forwarding Mode]

1. Proxy settings: Select SOCKS5 or HTTP, depending on which Proxy type was selected when extracting IP in MaxProxy Proxy;
2. IP Address: Enter 127.0.0.1 (If MaxProxy Proxy Software and VMLogin Fingerprint Browser are on the same computer, if not, enter the LAN IP address of the computer. The LAN IP address can be found in the Local Proxy section of the MaxProxyProxy software interface. The LAN IP address for this tutorial is 192.168.186.234.);
3. Port: Enter the corresponding port number (6000 in this tutorial);
4. Login User: Leave blank;
5. Login Password: Leave blank;
6. Click [Check Network] to check if the Proxy IP configured in the Network is connected successfully. If specific IP information is displayed, the connection is successful. Otherwise, it is a connection failure;
7. Finally, click [Save] to complete the configuration.

【Directly Retrieve IP Information Mode】

1. Proxy settings: select SOCKS5 or HTTP, depending on which Proxy type was selected when extracting IP addresses in MaxProxy;
2. IP address, port, login username, login password: copy the IP information from MaxProxy and click the “Paste Proxy Information” button in VMLogin Anti-Reconnaissance Browser;
3. Click “Check Network” to check if the configured proxy IP is connected successfully. If specific IP information is displayed, it means the connection is successful; otherwise, it is a failed connection;
4. Finally, remember to “Save” to make the configuration effective.

Ⅳ. Configuring more MaxProxy proxy ports: 

If there are not enough port forwarding ports, enter a more extensive range of port numbers in the port forwarding field in the system settings of the MaxProxy proxy software.